As result, struct phy_device *phydev->priv pointer will not be initializes (null). Definition at line 44 of file ksz9031_driver. This means that the PHY being used ksz9031 linux driver should be ksz9031 linux driver reported and the driver being used is indicated. 2 kernel Added by Timothy Entinger almost 4 years ago We are using a Critical Link BSP for the MitySOM using the AM335x and a baseboard that has the Micrel KSZ9031 ethernet phy on it. It may require adjusting RX or TX delays, depending on PCB wiring of each board.
ksz9031 linux driver Parametric NAND tree support enables fault detection ksz9031 linux driver between KSZ9031 I/Os and the board. A negative value can be assigned as rxc-skew-psec = ;. The LOG is as follows, 18. ethernet eth0: No MAC Management Counters available. * * Support : Micrel Phys: * Giga phys: ksz9021, ksz9031 * 100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041 * ksz8021, ksz8031, ksz8051, * ksz8081, ksz8091, * ksz8061, * Switch linux : ksz8873, ksz886x */ include 285339 usbcore: registered new device driver usb 0.